Contact

Battery Charger Technicians

3 open positions
Qualification: • 3 years Diploma or bachelor’s degree in electrical / Electronic engineering from a reputed university. • Candidates having technical course certificate (ITI) in electrical trade or equivalent with more than 12 years of relevant experience also can be considered. Experience: • Minimum 5 years’ experience in Battery Charger / UPS system in Electricity Utilities / OEMs • Candidate should be familiar with rectification of battery charge issues, attending faults, Preventive & corrective Maintenance, etc • Experienced in repairing of electronic component/equipment such as Battery charger units, UPS, Rectifier, inverter, Filters circuits, testing instruments, etc. • Candidate shall have good proficiency in English – to Speak, Read , Write
Gate #25,Arkan Building, Barwa Commercial Avenue,
Umm Al Saneem street
Doha DOH 31518
Qatar
03/03/24 10:57:16

Civil Engineer

1 open positions
Gate #25,Arkan Building, Barwa Commercial Avenue,
Umm Al Saneem street
Doha DOH 31518
Qatar
13/03/24 07:55:59

Internal Audit Specialist (General Auditing)

2 open positions
<p>General Description<br/>Perform professional internal auditing work for Business Support and Corporate Services. Work involves in all phases such as<br/>development of internal audit plan, assess risks faced by PWA, develop audit reports highlighting the recommendations and finally communicating the results of the audit to auditees and all other stakeholders.</p><p>Key Responsibilities<br/>• Participate in preparing the annual and long-term audit plans ensuring adequate coverage of all organizational and functional activities, management and operating systems, management practices.<br/>• Perform audit of all financial Policies, Processes and Procedures, and prepare audit reports which highlight recommendations and improvement opportunities.<br/>• Perform audit of operating processes and controls to evaluate the efficiency with which resources are employed and to identify profit and/or cost-effective improvements.<br/>• Support the development of PWA-wide Policies, Processes and Procedures and examine and evaluate the adequacy and effectiveness of the internal<br/>• control systems in place across the various auditable processes, including but not limited to HR related procedures on recruitment, employee leaves, promotions, performance management.<br/>• Provide assistance/support to IT audits and ensure that all IT related risks are identified and mitigated by the Information Systems Department.<br/>• Participate in the inventory exercise when required.<br/>• Assist in communicating the results of audits via written reports and oral presentations to management, and the President (if required).<br/>• Prepare audit programs to be aligned with engagement scope and requirements.<br/>• Assist the General Auditing Advisor / Expert in the development of applicable policies, procedures, and processes.<br/>• Work closely with the General Auditing Advisor / Expert to ensure compliance of the Internal Audit Department with PWA Strategy Management Policies, Processes and Procedures.<br/>• Keep current with latest market trends and developments and stay abreast with current trends and leading practices in Internal Audit.<br/>• Keep the General Auditing Advisor / Expert and Senior General Audit Specialist informed of significant issues that may jeopardize the achievement of PWA goals.</p><p>Key Business Interactions<br/>Internal:<br/>1. Internal Audit Department Manager<br/>2. Internal Auditing Advisor<br/>3. Head of General Audit Section<br/>4. General Auditing Advisor<br/>5. General Auditing Expert<br/>6. Senior General Audit Specialist<br/>7. Auditor One, Auditor Two, Auditor Three<br/>8. All other PWA employees as and when required</p><p>External:<br/>1. External Auditors<br/>2. Senior Management of Consultants, Contractors and Suppliers</p><p>Qualification:<br/>University Degree, preferably with a Major in Accounting and Professional Accounting Qualification; ACA, ACCA, CPA or equivalent (Master Degree)</p><p>Experience:<br/>Mandatory Requirements<br/>• 12 years relevant experience preferably in the Construction or related industries.<br/>• Excellent communication skills in English, written and spoken</p><p>Desirable requirements<br/>• Arabic language skills</p>
Gate #25,Arkan Building, Barwa Commercial Avenue,
Umm Al Saneem street
Doha DOH 31518
Qatar
27/03/24 09:44:30

Protection Technician

10 open positions
Qualification: • Diploma / Degree in Electrical / Electronic Engineering Experience: • Engineering Diploma holder with Minimum 5 Years of Protection experience or Engineering Degree holder with Minimum 2 years of experience, in Protection of in HV Live system, 11 KV Distribution systems with similar utility. • Candidate should be well familiar with Numerical/static/Electromechanical relay setting, • testing etc. • Candidate shall have good proficiency in English – to Speak, Read & Write
Gate #25,Arkan Building, Barwa Commercial Avenue,
Umm Al Saneem street
Doha DOH 31518
Qatar
25/02/24 10:35:32

Quality Monitor-1

5 open positions
<p>The candidate will be responsible to carryout audits, which requires hands-on experience and assist in projects audits to assess compliance of project plans and quality plans to the policies, processes and procedures in accordance with the Quality Management System based on ISO 9001, Qatar Construction Specifications, Project Specifications and Ashghal Requirements. Audit programs includes Quality Management system as well as Construction Practice audits, in addition to inspection of materials sources and plants.</p><p>Skills and Competencies:<br/>1) Specialized inspections (plants…etc.).<br/>2) Site Audits and Inspections.<br/>3) Management of Non-Conformities.<br/>4) Laws &amp; Regulations.<br/>5) Construction Specifications.<br/>6) Quality Management.<br/>7) Risk Management.<br/>8) Materials Testing.<br/>9) QSD policies, procedures &amp; guidelines.<br/>10) ISO Compliance.<br/>11) Occupational Health and Safety Management.<br/>12) Innovative Thinking.<br/>13) Analytical Ability.</p><p>Key Responsibilities:<br/>• Carry out audits related to site activities, audit and assist in auditing Quality Management System and Construction Practice, which are implemented across all programmes/ projects/ departments in alignment to the quality standards.<br/>• Collect data and evidence in relation to audits, prepare audit reports and follow up the non-conformities close out process.<br/>• Provide support to the business in all matters pertaining to quality on a project or an internal programmes/ projects/ department and provide training for junior engineers.<br/>• Assist in designing the standards for the Quality of the finished product to allow the QA Inspectors/Engineers to perform their project site inspections.</p><p>Qualification:<br/>• BSc in Civil Engineering<br/>• ISO9001 Lead Assessor Certification</p><p>Experience:<br/>• Should have minimum 20 years demonstrable postgraduate experience<br/>• Minimum 15 years directly related experience<br/>• Preferably, have experience in the gulf region.</p>
Gate #25,Arkan Building, Barwa Commercial Avenue,
Umm Al Saneem street
Doha DOH 31518
Qatar
14/03/24 06:34:53

Safety Inspector-1

6 open positions
<p>The candidate will be responsible to audit projects to assess compliance of project safety plans to the policies, processes, and procedures in accordance with the Safety Management System based on ISO 45001, Qatar Construction Specifications, Project Specifications and Ashghal Requirements. Audit programs includes Safety Management system as well as Construction Practice Safety audits, in addition to inspection of labour facilities.</p><p>Skills and Competencies:<br/>1) Planning of Safety Audits.<br/>2) Site Audits and Inspections for Safety.<br/>3) Management of Non-Conformities.<br/>4) Laws &amp; Regulations.<br/>5) Safety Specifications during construction.<br/>6) Project Management.<br/>7) Safety Management.<br/>8) Risk Management.<br/>9) QSD policies, procedures &amp; guidelines.<br/>10) Data Management and gathering.<br/>11) ISO Compliance.<br/>12) Occupational Health and Safety Management.<br/>13) Continuous improvement.<br/>14) Develop people.<br/>15) Engage People.<br/>16) Innovative Thinking.<br/>17) Analytical Ability.</p><p>Key Responsibilities:<br/>• Audit Safety Management System and Construction Practice Safety, which are implemented across all programmes/ projects/ departments in alignment to the safety standards.<br/>• Suggest improvements to the policies, processes, and procedures for all Project Safety Control activities across the business based on ISO 45001.<br/>• Provide support to the business in all matters pertaining to safety in a project or an internal programmes/ projects/ department and provide training for junior engineers.<br/>• Prepare regular monitoring reports that the Safety Management System is being implemented on projects and ensure its alignment to the safety standards.<br/>• Study and analyse all relevant legislation, regulations, and by-laws to ensure the PWA are fully compliant.<br/>• Develop a risk mitigation plan and establish tools to deal with the risks (for Project Safety).<br/>• Design the standards for the Safety of the finished product to allow the Inspectors/Engineers to perform their project site inspections.<br/>• Develop the standards and criteria for measuring the performance of the Contractors and/or Consultants working on a project.</p><p>Qualification:<br/>• BSc in Civil Eng. or BSc in Engineering / Science or equivalent<br/>• (NEBOSH Dip., Level 6)<br/>• ISO45001 Lead Auditor<br/>• NEBOSH (IGC), IOSH, OSHA</p><p>Experience:<br/>• Should have minimum 10 years demonstrable postgraduate experience<br/>• Minimum 7 years directly related experience<br/>• Preferably, have minimum 03 years’ experience in the gulf region.</p>
Gate #25,Arkan Building, Barwa Commercial Avenue,
Umm Al Saneem street
Doha DOH 31518
Qatar
12/03/24 06:36:03

Senior Engineer – Customer Service

1 open positions
Sr. Engineer – Customer Service Summary Description: The role holder is responsible for effectively developing the business plan for Customer service department in liaison with the Section Heads, based on the defined Customer Service strategy in order to achieve the overall organization goals and objectives. This role will also be responsible for analysing the costs associated with support services and develop cost optimization plans, in line with overall business strategy and performance management system to the related sections in customer service department. Core Responsibilities: • Liaises with section heads to assist in developing the business plan for Customer service Department based on finalized business strategy. • Analyses the impact support services on Customer service Department activities and identifies ways to align it to business objectives in order to ensure support services are directed towards assisting in achievement of business goals. • Conducts market research and studies the role of Customer service Department in the utility industry and uses best practices for KAHRAMAA’ s benefit. • Conducts necessary analysis to evaluate Customer service Department competitive strengths and weaknesses and utilisations of strengths to bridge the gaps and assist in achievement of business goals. • Participates in developing and implementing procedures to set business performance targets and to monitor business performance during the year against targets and against plan/budget. • Liaises with section heads of Customer service Department on a periodic basis to provide planning advice and ensures that they are aware of established business plan. • Contributes to the analysis and preparation of financial and economic studies pertaining to Customer service Department that have an impact on funds and investment potential and can help in strengthening the business plan. • Performs the necessary activities required for appropriate documentation of finalized Customer service Department business plans in line with the document control guidelines. • Develops the relevant reports (daily, weekly, monthly, quarterly, annual etc.) for review by senior management as and when required. • Provides the necessary assistance in obtaining and verifying input to corporate level strategies, business plans and performance reports as and when required. • Works in cooperation with Quality Assurance and Continual Improvement section on securing and maintain the ISO / Risk Management / ISMS certification. • Carries out and ensures the compliance of all activities within the Department are in-line with KAHRAMAA health and safety regulations. Self-Management Responsibilities: • Defines performance goals at the start of the year in discussion with the reporting manager and ensures that the goals are achieved during the course of the year. • Identifies the training and development requirements for self and agrees on them with the reporting manager to ensure that the required trainings are arranged and attended. • Keeps abreast of professional developments, new techniques and current issues through continued education and professional growth. KNOWLEDGE, SKILLS, AND EXPERIENCE • Bachelor’s degree or equivalent in Business Administration. • More than 10 years of relevant experience in a similar industry or in a similar role of which minimum 6 years of supervisory experience preferably in the area of Business Planning –Support. • Written and Spoken English is essential, Arabic is preferred.
Gate #25,Arkan Building, Barwa Commercial Avenue,
Umm Al Saneem street
Doha DOH 31518
Qatar
07/02/24 12:37:19

Senior Engineer – Electricity Meter

1 open positions
Sr. Engineer – Electricity Meter SUMMARY DESCRIPTION The role holder is responsible for reviewing, execution and of service connections related to the Metering work. The role holder is also responsible for maintaining records of all stock and installations related to meter installations and assist in smart Meter and AMI installation. Core Responsibilities: • Assists on the supervision of the implementation of electricity metering work and service connection to various type of consumer and developers. • Follow up with related KAHRAMAA Consultants to ensure expected performance. • Coordinates with Customer Service Department, other KAHRAMAA Dept and other governmental dept in order to execution the work as required. • Monitor the installation and maintenance work of all types of meter installation, upgrade, replacement and as per KAHRAMAA standard and safety regulation. • Assists Senior Engineer in all matters related to meter installations, maintenance, and management of KAHRAMAA supervisors, Technicians, Consultants and suppliers. • Understanding of Electricity metering known standards, relevant international codes, certifications, and metrology. • Planning of work execution and Preventive maintenance program and other initiatives to enhance the work in all aspects. Studies and comments on pre-qualification of metering aspects along with advancing of the state of art technology associated to the metering standard accordance with international Utility improvements. • Prepared the scope of work for tendering, review the material submittals, monthly reports and other technical report as required. • Works in cooperation with Quality Assurance and Continual Improvement section on securing and maintain the ISO / Risk Management / ISMS certification. • Carries out and ensures the compliance of all activities within the Department are in-line with KAHRAMAA health and safety regulations. Self-Management Responsibilities: • Defines performance goals at the start of the year in discussion with the reporting manager and ensures that the goals are achieved during the course of the year. • Identifies the training and development requirements for self and agrees on them with the reporting manager to ensure that the required trainings are arranged and attended. • Keeps abreast of professional developments, new techniques and current issues through continued education and professional growth. KNOWLEDGE, SKILLS, AND EXPERIENCE • Bachelor's degree or equivalent in instrumentation or Electrical Engineering. • More than 10 years of relevant experience in a similar industry or in a similar role of which minimum 3+ years of supervisory and project management experience preferably in the area of engineering encompassing inspection and installation works. • Written and Spoken English is essential, Arabic is preferred.
Gate #25,Arkan Building, Barwa Commercial Avenue,
Umm Al Saneem street
Doha DOH 31518
Qatar
13/03/24 07:55:43

Skilled Technician - Mechanic/Electric

2 open positions
A - Electrical • Diploma / Graduate in Electrical Engineering (full time course) with at least 5yrs. Relevant Experience with an Electrical distribution system / Generator sets. • Must have knowledge and experience in installation, operation and Maintenance of Engine, alternators, and control system of Gensets. • Must have knowledge and experience in Install, maintain, and repair Alternator, start control system, wiring, and lighting systems. • Must have knowledge and experience in Overhaling of Alternator and other electrical equipment. • Read technical diagrams and blueprints. • Inspect Generator parameters and other electrical components. • Troubleshoot/Diagnose electrical issues in Gen sets using appropriate of testing devices. • Repair and replace equipment, electrical wiring, • Should have a valid Qatar driving license with Main Duties of Skilled Technician / Mechanic for Diesel Generator. a) Skilled Technician / Mechanic for Diesel Generator deputed on a daily basis by the Contractor in the KAHRAMAA’s Electricity Distribution Department shall carry out all assigned works related to day-to-day work within the KM Technical works Group/KM Diesel Unit. The duties to be performed by the Skilled Technician / Mechanic shall include but not limited to the following: b) Ensure efficient and effective maintenance services of all Generator sets (Including servicing, troubleshooting, fault finding and repairs) to ensure the safety, reliability and operational effectiveness of all generators and control systems in compliance with the KM requirements practices and procedures. c) Carry out Service, maintenance, diagnosis, and repair of Gensets. d) Ensure that all generators and control systems are kept in good order and are regularly inspected and maintained in accordance with KM health and safety requirements and are fully compliant with KM Procedure. e) Daily Inspection of generators to identify faults, maintain, service, replace parts and repair of generators as directed in accordance with the manufacturer recommendations &amp; schedule and KM instructions and keep records. f) Attend Emergency/Program call out services for generator connection at various locations across Qatar g) Perform site inspection when required. h) Working beyond official hours as and when required. i) Carry out any other duties as assigned by KAHRAMAA Diesel unit (Supervisor/Foreman). j) Perform all planned Preventative Maintenance (Electrical and Mechanical) of all KAHRAMAA Generator sets. k) Prepare reports, maintain records, and requisition supplies and spare parts. l) Conducting field visits in the case of an emergency or sudden breakdown. m) Generator connection (Cable termination) at Generator end and the FP/MVP/consumer breaker and at various sites across Qatar when required. n) Arrange spare parts for the Genset Service, Maintenance, Repair, and overhauling. o) Maintaining records of parts inventory. p) Maintaining Maintenance Records.
Gate #25,Arkan Building, Barwa Commercial Avenue,
Umm Al Saneem street
Doha DOH 31518
Qatar
25/03/24 09:51:50

PSTech seeks technological breakthroughs by anticipating customer and market requirements and utilizing its innovative expertise to satisfy those needs.

About Us